For Canon pf-03 PF03 printhead resetter for Canon IPF500 IPF510 IPF600
IPF605 IPF610 IPF710 IPF720 IPF810 IPF815 resetter pf-03
1: This product is only for printhead supporting the use of tools, and can not repair bad printhead , if your printer show print head has been damaged need to be replaced, this resetter can't reset it , please confirm before buying your machine printhead can work!
2: Before purchase, please carefully read the following product description of the product (the product has been tested before shipment), as long as the decoder brush print head, the indicator light from red to green on the successful description of the brush There is no quality problem in this case we do not support the customer return
Suitable For Canon Printer Model:
For Canon iPF500/510/600/605/610/700/710//720/810/815/820/825 iPF6000S/8000S/8010S/9000S/9010S iPF5000/5100/6100/6200/8000/8100/8110/9000/9100/9110
1: As we all know, the print head used in the largest color is usually Y, PM, PC, etc., by periodically on the printer after the print head decoding, can effectively prevent the nozzle overprint and early damage, thereby extending the service life.
2: easy to detect the print head is good or bad: sometimes from the bar lack of color, can not immediately determine whether the print head or printer problems, the print head reset by reset, re-swap position or installed on different models of the printer, You can easily detect whether the print head is normal.
3: eliminate part of the error: sometimes the print head will appear "403E / 403F" "print head exception, please replace" and so on, you can try to use the reset reset and re-install, or can be eliminated (print head does not appear physical damage And circuit failure to eliminate the case).
4: can change the print head model, the PF-04 or PF-05 print head decoder decoder can be rewritten into PF-03 print head.
Use the method (see product picture): the print head on the decoder, press the decoder button (RESET BUTTON), the indicator light flashes red after the green that reset success! If the red color does not change after the green, still red, then the reset decoding is unsuccessful, need to reset, multiple reset is not successful, then the print head has a circuit failure or print head is damaged